Create a virtual Button Box for Microsoft Flight Simulator

This page explains the Button Box Feature with Details for Microsoft Flight Simulator.

For other Games, refer to the following help page: How to create a virtual Button Box to
control all Games on your PC

What you can do with a Button Box for Microsoft Flight Simulator

• Lights
• Fuel Pumps
• Heatings
• Master Switches
• Nav Frequencies
• ...

You can basically do everything which can be triggered in the game, from your Android device

1. Prerequisites

• An Android Device with the SIM Dashboard App installed
• A PC with the SIM Dashboard PC Application installed and running

2. Pairing with the PC

Make sure that your Android Device is on the same network like your PC and then Pair the Android Device with your PC

3. Select MS Flight Simulator in the SIM Dashboard App

Click on the Hamburger Menu Button in the upper left edge of the screen.

Select MS Flight Simulator from the list of supported Games click on it's Name

4. Edit Mode

Click on the Pen Icon to enter the Edit Mode

Then click on the (+) Icon

and finally on Add widget/design

5. Add Button Box Widget

Click on Create new layout Create new Design (Please note: The screen looks a little bit different now)

If you don't see this Message Box, you already have a Widget on this screen, so you can just continue

Click on Button Box entry on the left side and chosse a Button from the right side afterwards (in this example I have choosen the Round Button)

6. Customize the Button Box Widget

The Customize Screen of the Widget opens, where you can change the Settings of the Button.

7. Select the Command that the Button should execute

In this example we like to toggle the Autopilot On and Off

• Activate the Option Send a SimConnect Command
• Enter AP_MASTER into the SimConnect Name
• The SimConnect Param stays blank.

For the list of available Commands scroll down to the end of this help page to the List of SimConnect Commands

Now close the Dialog with a click on OK.

In the Editor click on the checkmark icon to save your Design.

8. Testing the Button

Tap on your button and see how the Airplane in the Game reacts.

Problems?

The Game does not recognize the key

Try some other Commands, if they work, the connection to the PC Application is ok and the game has just no implementation for this Command on the selected Airplane.

No Button is simulated on my PC

Solution: Re-Pair the Android Device with your PC, because the Ip Address of your PC may have changed, so the App is sending the Command to the wrong Ip. Make sure that the SIM Dashboard PC Application is allowed in the Firewall

9. List of available SimConnect Commands

Copy the desired SimConnect Name from the List to the SimConnect Option of your Button in the App as described in Step 7

Additional Sim Dashboard SimConnect Commands

These additional commands extend the list of SimConnect Commands from the Game

SimConnect Name	Description
SIMDB_TOGGLE_NAV12	Switches the active Nav Frequency between Nav1 and Nav2
SIMDB_SWAP_NAV_FREQUENCY	Swaps the active and standby Frequency of the current selected Nav Frequency
SIMDB_NAV_WHOLE_INC	Increments the currently selected Nav Frequency by one MHz
SIMDB_NAV_WHOLE_DEC	Decrements the currently selected Nav Frequency by one MHz
SIMDB_NAV_FRACT_INC	Increments the currently selected Nav Frequency by 25 KHz
SIMDB_NAV_FRACT_DEC	Decrements the currently selected Nav Frequency by 25 KHz
SIMDB_TOGGLE_COM12	Switches the active Com Frequency between Com1 and Com2
SIMDB_SWAP_COM_FREQUENCY	Swaps the active and standby Frequency of the current selected Com Frequency
SIMDB_COM_WHOLE_INC	Increments the currently selected Com Frequency by one MHz
SIMDB_COM_WHOLE_DEC	Decrements the currently selected Com Frequency by one MHz
SIMDB_COM_FRACT_INC	Increments the currently selected Com Frequency by 25 KHz
SIMDB_COM_FRACT_DEC	Decrements the currently selected Com Frequency by 25 KHz
SIMDB_VOR_INC	Increments the currently selected VOR OBS setting
SIMDB_VOR_DEC	Decrements the currently selected VOR OBS setting

SimConnect Commands supported by the Game

Not all events apply to all aircraft and all situations. Events that require an argument have ranges or suggestions listed in parenthesis in the Description column.

SimConnect Name	Description
SLING_PICKUP_RELEASE	Toggle between pickup and release mode. Hold mode is automatic and cannot be selected. Refer to the document Notes on Aircraft Systems.
HOIST_SWITCH_EXTEND	The rate at which a hoist cable extends is set in the Aircraft Configuration File.
HOIST_SWITCH_RETRACT	The rate at which a hoist cable retracts is set in the Aircraft Configuration File.
HOIST_SWITCH_SET	The data value should be set to one of:<0 up=0 off>0 down
HOIST_DEPLOY_TOGGLE	Toggles the hoist arm switch, extend or retract.
HOIST_DEPLOY_SET	The data value should be set to:0 - set hoist switch to retract the arm1 - set hoist switch to extend the arm
ANTIDETONATION_TANK_VALVE_TOGGLE	Toggle the antidetonation valve. Pass a value to determine which tank, if there are multiple tanks, to use. Tanks are indexed from 1. Refer to the document Notes on Aircraft Systems.
NITROUS_TANK_VALVE_TOGGLE	Toggle the nitrous valve. Pass a value to determine which tank, if there are multiple tanks, to use. Tanks are indexed from 1.
TOGGLE_RACERESULTS_WINDOW
TAKEOFF_ASSIST_ARM_TOGGLE	Deploy or remove the assist arm. Refer to the document Notes on Aircraft Systems.
TAKEOFF_ASSIST_ARM_SET	Value:TRUE request setFALSE request unset
TAKEOFF_ASSIST_FIRE	If everything is set up correctly. Launch from the catapult.
TOGGLE_LAUNCH_BAR_SWITCH	Toggle the request for the launch bar to be installed or removed.
SET_LAUNCH_BAR_SWITCH	Value:TRUE request setFALSE request unset
REPAIR_AND_REFUEL	Fully repair and refuel the user aircraft. Ignored if flight realism is enforced.
DME_SELECT	Selects one of the two DME systems (1,2).
FUEL_DUMP_TOGGLE	Turns on or off the fuel dump switch.
VIEW_COCKPIT_FORWARD	Switch immediately to the forward view, in 2D mode.
VIEW_VIRTUAL_COCKPIT_FORWARD	Switch immediately to the forward view, in virtual cockpit mode.
TOW_PLANE_RELEASE	Release a towed aircraft, usually a glider.
TOW_PLANE_REQUEST	Request a tow plane. The user aircraft must be tow-able, stationary, on the ground and not already attached for this to succeed.
REQUEST_FUEL_KEY	Request a fuel truck. The aircraft must be in a parking spot for this to be successful.
RELEASE_DROPPABLE_OBJECTS	Release one droppable object. Multiple key events will release multiple objects.
VIEW_PANEL_ALPHA_SET	Sets the alpha-blending value for the panel. Takes a parameter in the range 0 to 255. The alpha-blending can be changed from the keyboard using Ctrl-Shift-T, and the plus and minus keys.
VIEW_PANEL_ALPHA_SELECT	Sets the mode to change the alpha-blending, so the keys KEY_PLUS and KEY_MINUS increment and decrement the value.
VIEW_PANEL_ALPHA_INC	Increment alpha-blending for the panel.
VIEW_PANEL_ALPHA_DEC	Decrement alpha-blending for the panel.
VIEW_LINKING_SET	Links all the views from one camera together, so that panning the view will change the view of all the linked cameras.
VIEW_LINKING_TOGGLE	Turns view linking on or off.
RADIO_SELECTED_DME_IDENT_ENABLE	Turns on the identification sound for the selected DME.
RADIO_SELECTED_DME_IDENT_DISABLE	Turns off the identification sound for the selected DME.
RADIO_SELECTED_DME_IDENT_SET	Sets the DME identification sound to the given filename.
RADIO_SELECTED_DME_IDENT_TOGGLE	Turns on or off the identification sound for the selected DME.
GAUGE_KEYSTROKE	Enables a keystroke to be sent to a gauge that is in focus. The keystrokes can only be in the range 0 to 9, A to Z, and the four keys: plus, minus, comma and period. This is typically used to allow some keyboard entry to a complex device such as a GPS to enter such things as ICAO codes using the keyboard, rather than turning dials.
SIMUI_WINDOW_HIDESHOW	Display the ATC window.
TOGGLE_VARIOMETER_SWITCH	Turn the variometer on or off.
TOGGLE_TURN_INDICATOR_SWITCH	Turn the turn indicator on or off.
VIEW_WINDOW_TITLES_TOGGLE	Turn window titles on or off.
AXIS_PAN_PITCH	Sets the pitch of the axis. Requires an angle.
AXIS_PAN_HEADING	Sets the heading of the axis. Requires an angle.
AXIS_PAN_TILT	Sets the tilt of the axis. Requires an angle.
VIEW_AXIS_INDICATOR_CYCLE	Step through the view axes.
VIEW_MAP_ORIENTATION_CYCLE	Step through the map orientations.
TOGGLE_JETWAY	Requests a jetway, which will only be answered if the aircraft is at a parking spot.
RETRACT_FLOAT_SWITCH_DEC	If the plane has retractable floats, moves the retract position from Extend to Neutral, or Neutral to Retract.
RETRACT_FLOAT_SWITCH_INC	If the plane has retractable floats, moves the retract position from Retract to Neutral, or Neutral to Extend.
TOGGLE_WATER_BALLAST_VALVE	Turn the water ballast valve on or off.
VIEW_CHASE_DISTANCE_ADD	Increments the distance of the view camera from the chase object (such as in Spot Plane view, or viewing an AI controlled aircraft).
VIEW_CHASE_DISTANCE_SUB	Decrements the distance of the view camera from the chase object.
APU_STARTER	Start up the auxiliary power unit (APU).
APU_OFF_SWITCH	Turn the APU off.
APU_GENERATOR_SWITCH_TOGGLE	Turn the auxiliary generator on or off.
APU_GENERATOR_SWITCH_SET	Set the auxiliary generator switch (0,1).
EXTINGUISH_ENGINE_FIRE	Takes a two digit argument.  The first digit represents the fire extinguisher index, and the second represents the engine index.  For example,  11 would represent using bottle 1 on engine 1.  21 would represent using bottle 2 on engine 1.  Typical entries for a twin engine aircraft would be 11 and 22.
AP_MAX_BANK_INC	Autopilot max bank angle increment.
AP_MAX_BANK_DEC	Autopilot max bank angle decrement.
AP_N1_HOLD	Autopilot, hold the N1 percentage at its current level.
AP_N1_REF_INC	Increment the autopilot N1 reference.
AP_N1_REF_DEC	Decrement the autopilot N1 reference.
AP_N1_REF_SET	Sets the autopilot N1 reference.
HYDRAULIC_SWITCH_TOGGLE	Turn the hydraulic switch on or off.
BLEED_AIR_SOURCE_CONTROL_INC	Increases the bleed air source control.
BLEED_AIR_SOURCE_CONTROL_DEC	Decreases the bleed air source control.
TURBINE_IGNITION_SWITCH_TOGGLE	Turn the turbine ignition switch on or off.
CABIN_NO_SMOKING_ALERT_SWITCH_TOGGLE	Turn the 'No smoking' alert on or off.
CABIN_SEATBELTS_ALERT_SWITCH_TOGGLE	Turn the 'Fasten seatbelts' alert on or off.
ANTISKID_BRAKES_TOGGLE	Turn the anti-skid braking system on or off.
GPWS_SWITCH_TOGGLE	Turn the g round proximity warning system (GPWS) on or off.
VIDEO_RECORD_TOGGLE	Turn on or off the video recording feature. This records uncompressed AVI format files to:My DocumentsMy Videos
TOGGLE_AIRPORT_NAME_DISPLAY	Turn on or off the airport name.
CAPTURE_SCREENSHOT	Capture the current view as a screenshot. Which will be saved to a bmp file in:My DocumentsMy Pictures
MOUSE_LOOK_TOGGLE	Switch Mouse Look mode on or off. Mouse Look mode enables a user to control their view using the mouse, and holding down the space bar.
YAXIS_INVERT_TOGGLE	Switch inversion of Y axis controls on or off.
AUTORUDDER_TOGGLE	Turn the automatic rudder control feature on or off.
FLY_BY_WIRE_ELAC_TOGGLE	Turn on or off the fly by wire Elevators and Ailerons computer.
FLY_BY_WIRE_FAC_TOGGLE	Turn on or off the fly by wire Flight Augmentation computer.
FLY_BY_WIRE_SEC_TOGGLE	Turn on or off the fly by wire Spoilers and Elevators computer.
MANUAL_FUEL_PRESSURE_PUMP	Activate the manual fuel pressure pump.
STEERING_INC	Increments the nose wheel steering position by 5 percent.
STEERING_DEC	Decrements the nose wheel steering position by 5 percent.
STEERING_SET	Sets the value of the nose wheel steering position. Zero is straight ahead (-16383, far left +16383, far right).
FREEZE_LATITUDE_LONGITUDE_TOGGLE	Turns the freezing of the lat/lon position of the aircraft (either user or AI controlled) on or off. If this key event is set, it means that the latitude and longitude of the aircraft are not being controlled by ESP, so enabling, for example, a SimConnect client to control the position of the aircraft. This can also apply to altitude and attitude. Refer to the simulation variables:IS LATITUDE LONGITUDE FREEZE ON,IS ALTITUDE FREEZE ON, andIS ATTITUDE FREEZE ONRefer also to the SimConnect_AIReleaseControl function.
FREEZE_LATITUDE_LONGITUDE_SET	Freezes the lat/lon position of the aircraft.
FREEZE_ALTITUDE_TOGGLE	Turns the freezing of the altitude of the aircraft on or off.
FREEZE_ALTITUDE_SET	Freezes the altitude of the aircraft..
FREEZE_ATTITUDE_TOGGLE	Turns the freezing of the attitude (pitch, bank and heading) of the aircraft on or off.
FREEZE_ATTITUDE_SET	Freezes the attitude (pitch, bank and heading) of the aircraft.
PRESSURIZATION_PRESSURE_ALT_INC
PRESSURIZATION_PRESSURE_ALT_DEC
PRESSURIZATION_CLIMB_RATE_INC	Sets the rate at which cabin pressurization is increased.
PRESSURIZATION_CLIMB_RATE_DEC	Sets the rate at which cabin pressurization is decreased.
PRESSURIZATION_PRESSURE_DUMP_SWTICH	Sets the cabin pressure to the outside air pressure.
FUEL_SELECTOR_LEFT_MAIN	Sets the fuel selector. Fuel will be taken in the order left tip, left aux, then main fuel tanks.
FUEL_SELECTOR_2_LEFT_MAIN	Sets the fuel selector for engine 2.
FUEL_SELECTOR_3_LEFT_MAIN	Sets the fuel selector for engine 3.
FUEL_SELECTOR_4_LEFT_MAIN	Sets the fuel selector for engine 4.
FUEL_SELECTOR_RIGHT_MAIN	Sets the fuel selector. Fuel will be taken in the order right tip, right aux, then main fuel tanks.
FUEL_SELECTOR_2_RIGHT_MAIN	Sets the fuel selector for engine 2.
FUEL_SELECTOR_3_RIGHT_MAIN	Sets the fuel selector for engine 3.
FUEL_SELECTOR_4_RIGHT_MAIN	Sets the fuel selector for engine 4.
POINT_OF_INTEREST_TOGGLE_POINTER	Turn the point-of-interest indicator (often a light beam) on or off. Refer to the Missions system documentation.
POINT_OF_INTEREST_CYCLE_PREVIOUS	Change the current point-of-interest to the previous point-of-interest.
POINT_OF_INTEREST_CYCLE_NEXT	Change the current point-of-interest to the next point-of-interest.
G1000_PFD_FLIGHTPLAN_BUTTON	The primary flight display (PFD) should display its current flight plan.
G1000_PFD_PROCEDURE_BUTTON	Turn to the Procedure page.
G1000_PFD_ZOOMIN_BUTTON	Zoom in on the current map.
G1000_PFD_ZOOMOUT_BUTTON	Zoom out on the current map.
G1000_PFD_DIRECTTO_BUTTON	Turn to the Direct To page.
G1000_PFD_MENU_BUTTON	If a segmented flight plan is highlighted, activates the associated menu.
G1000_PFD_CLEAR_BUTTON	Clears the current input.
G1000_PFD_ENTER_BUTTON	Enters the current input.
G1000_PFD_CURSOR_BUTTON	Turns on or off a screen cursor.
G1000_PFD_GROUP_KNOB_INC	Step up through the page groups.
G1000_PFD_GROUP_KNOB_DEC	Step down through the page groups.
G1000_PFD_PAGE_KNOB_INC	Step up through the individual pages.
G1000_PFD_PAGE_KNOB_DEC	Step down through the individual pages.
G1000_PFD_SOFTKEY1
G1000_PFD_SOFTKEY2
G1000_PFD_SOFTKEY3
G1000_PFD_SOFTKEY4
G1000_PFD_SOFTKEY5
G1000_PFD_SOFTKEY6
G1000_PFD_SOFTKEY7
G1000_PFD_SOFTKEY8
G1000_PFD_SOFTKEY9
G1000_PFD_SOFTKEY10
G1000_PFD_SOFTKEY11
G1000_PFD_SOFTKEY12
G1000_MFD_FLIGHTPLAN_BUTTON	The multifunction display (MFD) should display its current flight plan.
G1000_MFD_PROCEDURE_BUTTON	Turn to the Procedure page.
G1000_MFD_ZOOMIN_BUTTON	Zoom in on the current map.
G1000_MFD_ZOOMOUT_BUTTON	Zoom out on the current map.
G1000_MFD_DIRECTTO_BUTTON	Turn to the Direct To page.
G1000_MFD_MENU_BUTTON	If a segmented flight plan is highlighted, activates the associated menu.
G1000_MFD_CLEAR_BUTTON	Clears the current input.
G1000_MFD_ENTER_BUTTON	Enters the current input.
G1000_MFD_CURSOR_BUTTON	Turns on or off a screen cursor.
G1000_MFD_GROUP_KNOB_INC	Step up through the page groups.
G1000_MFD_GROUP_KNOB_DEC	Step down through the page groups.
G1000_MFD_PAGE_KNOB_INC	Step up through the individual pages.
G1000_MFD_PAGE_KNOB_DEC	Step down through the individual pages.
G1000_MFD_SOFTKEY1
G1000_MFD_SOFTKEY2
G1000_MFD_SOFTKEY3
G1000_MFD_SOFTKEY4
G1000_MFD_SOFTKEY5
G1000_MFD_SOFTKEY6
G1000_MFD_SOFTKEY7
G1000_MFD_SOFTKEY8
G1000_MFD_SOFTKEY9
G1000_MFD_SOFTKEY10
G1000_MFD_SOFTKEY11
G1000_MFD_SOFTKEY2
THROTTLE_FULL	Set throttles max
THROTTLE_INCR	Increment throttles
THROTTLE_INCR_SMALL	Increment throttles small
THROTTLE_DECR	Decrement throttles
THROTTLE_DECR_SMALL	Decrease throttles small
THROTTLE_CUT	Set throttles to idle
INCREASE_THROTTLE	Increment throttles
DECREASE_THROTTLE	Decrement throttles
THROTTLE_SET	Set throttles exactly (0- 16383)
AXIS_THROTTLE_SET	Set throttles (0- 16383)
THROTTLE1_SET	Set throttle 1 exactly (0 to 16383)
THROTTLE2_SET	Set throttle 2 exactly (0 to 16383)
THROTTLE3_SET	Set throttle 3 exactly (0 to 16383)
THROTTLE4_SET	Set throttle 4 exactly (0 to 16383)
THROTTLE1_FULL	Set throttle 1 max
THROTTLE1_INCR	Increment throttle 1
THROTTLE1_INCR_SMALL	Increment throttle 1 small
THROTTLE1_DECR	Decrement throttle 1
THROTTLE1_CUT	Set throttle 1 to idle
THROTTLE2_FULL	Set throttle 2 max
THROTTLE2_INCR	Increment throttle 2
THROTTLE2_INCR_SMALL	Increment throttle 2 small
THROTTLE2_DECR	Decrement throttle 2
THROTTLE2_CUT	Set throttle 2 to idle
THROTTLE3_FULL	Set throttle 3 max
THROTTLE3_INCR	Increment throttle 3
THROTTLE3_INCR_SMALL	Increment throttle 3 small
THROTTLE3_DECR	Decrement throttle 3
THROTTLE3_CUT	Set throttle 3 to idle
THROTTLE4_FULL	Set throttle 1 max
THROTTLE4_INCR	Increment throttle 4
THROTTLE4_INCR_SMALL	Increment throttle 4 small
THROTTLE4_DECR	Decrement throttle 4
THROTTLE4_CUT	Set throttle 4 to idle
THROTTLE_10	Set throttles to 10%
THROTTLE_20	Set throttles to 20%
THROTTLE_30	Set throttles to 30%
THROTTLE_40	Set throttles to 40%
THROTTLE_50	Set throttles to 50%
THROTTLE_60	Set throttles to 60%
THROTTLE_70	Set throttles to 70%
THROTTLE_80	Set throttles to 80%
THROTTLE_90	Set throttles to 90%
AXIS_THROTTLE1_SET	Set throttle 1 exactly (-16383 - +16383)
AXIS_THROTTLE2_SET	Set throttle 2 exactly (-16383 - +16383)
AXIS_THROTTLE3_SET	Set throttle 3 exactly (-16383 - +16383)
AXIS_THROTTLE4_SET	Set throttle 4 exactly (-16383 - +16383)
THROTTLE1_DECR_SMALL	Decrease throttle 1 small
THROTTLE2_DECR_SMALL	Decrease throttle 2 small
THROTTLE3_DECR_SMALL	Decrease throttle 3 small
THROTTLE4_DECR_SMALL	Decrease throttle 4 small
PROP_PITCH_DECR_SMALL	Decrease prop levers small
PROP_PITCH1_DECR_SMALL	Decrease prop lever 1 small
PROP_PITCH2_DECR_SMALL	Decrease prop lever 2 small
PROP_PITCH3_DECR_SMALL	Decrease prop lever 3 small
PROP_PITCH4_DECR_SMALL	Decrease prop lever 4 small
MIXTURE1_RICH	Set mixture lever 1 to max rich
MIXTURE1_INCR	Increment mixture lever 1
MIXTURE1_INCR_SMALL	Increment mixture lever 1 small
MIXTURE1_DECR	Decrement mixture lever 1
MIXTURE1_LEAN	Set mixture lever 1 to max lean
MIXTURE2_RICH	Set mixture lever 2 to max rich
MIXTURE2_INCR	Increment mixture lever 2
MIXTURE2_INCR_SMALL	Increment mixture lever 2 small
MIXTURE2_DECR	Decrement mixture lever 2
MIXTURE2_LEAN	Set mixture lever 2 to max lean
MIXTURE3_RICH	Set mixture lever 3 to max rich
MIXTURE3_INCR	Increment mixture lever 3
MIXTURE3_INCR_SMALL	Increment mixture lever 3 small
MIXTURE3_DECR	Decrement mixture lever 3
MIXTURE3_LEAN	Set mixture lever 3 to max lean
MIXTURE4_RICH	Set mixture lever 4 to max rich
MIXTURE4_INCR	Increment mixture lever 4
MIXTURE4_INCR_SMALL	Increment mixture lever 4 small
MIXTURE4_DECR	Decrement mixture lever 4
MIXTURE4_LEAN	Set mixture lever 4 to max lean
MIXTURE_SET	Set mixture levers to exact value (0 to 16383)
MIXTURE_RICH	Set mixture levers to max rich
MIXTURE_INCR	Increment mixture levers
MIXTURE_INCR_SMALL	Increment mixture levers small
MIXTURE_DECR	Decrement mixture levers
MIXTURE_LEAN	Set mixture levers to max lean
MIXTURE1_SET	Set mixture lever 1 exact value (0 to 16383)
MIXTURE2_SET	Set mixture lever 2 exact value (0 to 16383)
MIXTURE3_SET	Set mixture lever 3 exact value (0 to 16383)
MIXTURE4_SET	Set mixture lever 4 exact value (0 to 16383)
AXIS_MIXTURE_SET	Set mixture lever 1 exact value (-16383 to +16383)
AXIS_MIXTURE1_SET	Set mixture lever 1 exact value (-16383 to +16383)
AXIS_MIXTURE2_SET	Set mixture lever 2 exact value (-16383 to +16383)
AXIS_MIXTURE3_SET	Set mixture lever 3 exact value (-16383 to +16383)
AXIS_MIXTURE4_SET	Set mixture lever 4 exact value (-16383 to +16383)
MIXTURE_SET_BEST	Set mixture levers to current best power setting
MIXTURE_DECR_SMALL	Decrement mixture levers small
MIXTURE1_DECR_SMALL	Decrement mixture lever 1 small
MIXTURE2_DECR_SMALL	Decrement mixture lever 4 small
MIXTURE3_DECR_SMALL	Decrement mixture lever 4 small
MIXTURE4_DECR_SMALL	Decrement mixture lever 4 small
PROP_PITCH_SET	Set prop pitch levers (0 to 16383)
PROP_PITCH_LO	Set prop pitch levers max (lo pitch)
PROP_PITCH_INCR	Increment prop pitch levers
PROP_PITCH_INCR_SMALL	Increment prop pitch levers small
PROP_PITCH_DECR	Decrement prop pitch levers
PROP_PITCH_HI	Set prop pitch levers min (hi pitch)
PROP_PITCH1_SET	Set prop pitch lever 1 exact value (0 to 16383)
PROP_PITCH2_SET	Set prop pitch lever 2 exact value (0 to 16383)
PROP_PITCH3_SET	Set prop pitch lever 3 exact value (0 to 16383)
PROP_PITCH4_SET	Set prop pitch lever 4 exact value (0 to 16383)
PROP_PITCH1_LO	Set prop pitch lever 1 max (lo pitch)
PROP_PITCH1_INCR	Increment prop pitch lever 1
PROP_PITCH1_INCR_SMALL	Increment prop pitch lever 1 small
PROP_PITCH1_DECR	Decrement prop pitch lever 1
PROP_PITCH1_HI	Set prop pitch lever 1 min (hi pitch)
PROP_PITCH2_LO	Set prop pitch lever 2 max (lo pitch)
PROP_PITCH2_INCR	Increment prop pitch lever 2
PROP_PITCH2_INCR_SMALL	Increment prop pitch lever 2 small
PROP_PITCH2_DECR	Decrement prop pitch lever 2
PROP_PITCH2_HI	Set prop pitch lever 2 min (hi pitch)
PROP_PITCH3_LO	Set prop pitch lever 3 max (lo pitch)
PROP_PITCH3_INCR	Increment prop pitch lever 3
PROP_PITCH3_INCR_SMALL	Increment prop pitch lever 3 small
PROP_PITCH3_DECR	Decrement prop pitch lever 3
PROP_PITCH3_HI	Set prop pitch lever 3 min (hi pitch)
PROP_PITCH4_LO	Set prop pitch lever 4 max (lo pitch)
PROP_PITCH4_INCR	Increment prop pitch lever 4
PROP_PITCH4_INCR_SMALL	Increment prop pitch lever 4 small
PROP_PITCH4_DECR	Decrement prop pitch lever 4
PROP_PITCH4_HI	Set prop pitch lever 4 min (hi pitch)
AXIS_PROPELLER_SET	Set propeller levers exact value (-16383 to +16383)
AXIS_PROPELLER1_SET	Set propeller lever 1 exact value (-16383 to +16383)
AXIS_PROPELLER2_SET	Set propeller lever 2 exact value (-16383 to +16383)
AXIS_PROPELLER3_SET	Set propeller lever 3 exact value (-16383 to +16383)
AXIS_PROPELLER4_SET	Set propeller lever 4 exact value (-16383 to +16383)
JET_STARTER	Selects jet engine starter (for +/- sequence)
MAGNETO_SET	Sets magnetos (0,1)
TOGGLE_STARTER1	Toggle starter 1
TOGGLE_STARTER2	Toggle starter 2
TOGGLE_STARTER3	Toggle starter 3
TOGGLE_STARTER4	Toggle starter 4
TOGGLE_ALL_STARTERS	Toggle starters
ENGINE_AUTO_START	Triggers auto-start
ENGINE_AUTO_SHUTDOWN	Triggers auto-shutdown
MAGNETO	Selects magnetos (for +/- sequence)
MAGNETO_DECR	Decrease magneto switches positions
MAGNETO_INCR	Increase magneto switches positions
MAGNETO1_OFF	Set engine 1 magnetos off
MAGNETO1_RIGHT	Toggle engine 1 right magneto
MAGNETO1_LEFT	Toggle engine 1 left magneto
MAGNETO1_BOTH	Set engine 1 magnetos on
MAGNETO1_START	Set engine 1 magnetos on and toggle starter
MAGNETO2_OFF	Set engine 2 magnetos off
MAGNETO2_RIGHT	Toggle engine 2 right magneto
MAGNETO2_LEFT	Toggle engine 2 left magneto
MAGNETO2_BOTH	Set engine 2 magnetos on
MAGNETO2_START	Set engine 2 magnetos on and toggle starter
MAGNETO3_OFF	Set engine 3 magnetos off
MAGNETO3_RIGHT	Toggle engine 3 right magneto
MAGNETO3_LEFT	Toggle engine 3 left magneto
MAGNETO3_BOTH	Set engine 3 magnetos on
MAGNETO3_START	Set engine 3 magnetos on and toggle starter
MAGNETO4_OFF	Set engine 4 magnetos off
MAGNETO4_RIGHT	Toggle engine 4 right magneto
MAGNETO4_LEFT	Toggle engine 4 left magneto
MAGNETO4_BOTH	Set engine 4 magnetos on
MAGNETO4_START	Set engine 4 magnetos on and toggle starter
MAGNETO_OFF	Set engine magnetos off
MAGNETO_RIGHT	Set engine right magnetos on
MAGNETO_LEFT	Set engine left magnetos on
MAGNETO_BOTH	Set engine magnetos on
MAGNETO_START	Set engine magnetos on and toggle starters
MAGNETO1_DECR	Decrease engine 1 magneto switch position
MAGNETO1_INCR	Increase engine 1 magneto switch position
MAGNETO2_DECR	Decrease engine 2 magneto switch position
MAGNETO2_INCR	Increase engine 2 magneto switch position
MAGNETO3_DECR	Decrease engine 3 magneto switch position
MAGNETO3_INCR	Increase engine 3 magneto switch position
MAGNETO4_DECR	Decrease engine 4 magneto switch position
MAGNETO4_INCR	Increase engine 4 magneto switch position
MAGNETO1_SET	Set engine 1 magneto switch
MAGNETO2_SET	Set engine 2 magneto switch
MAGNETO3_SET	Set engine 3 magneto switch
MAGNETO4_SET	Set engine 4 magneto switch
ANTI_ICE_ON	Sets anti-ice switches on
ANTI_ICE_OFF	Sets anti-ice switches off
ANTI_ICE_SET	Sets anti-ice switches from argument (0,1)
ANTI_ICE_TOGGLE	Toggle anti-ice switches
ANTI_ICE_TOGGLE_ENG1	Toggle engine 1 anti-ice switch
ANTI_ICE_TOGGLE_ENG2	Toggle engine 2 anti-ice switch
ANTI_ICE_TOGGLE_ENG3	Toggle engine 3 anti-ice switch
ANTI_ICE_TOGGLE_ENG4	Toggle engine 4 anti-ice switch
ANTI_ICE_SET_ENG1	Sets engine 1 anti-ice switch (0,1)
ANTI_ICE_SET_ENG2	Sets engine 2 anti-ice switch (0,1)
ANTI_ICE_SET_ENG3	Sets engine 3 anti-ice switch (0,1)
ANTI_ICE_SET_ENG4	Sets engine 4 anti-ice switch (0,1)
TOGGLE_FUEL_VALVE_ALL	Toggle engine fuel valves
TOGGLE_FUEL_VALVE_ENG1	Toggle engine 1 fuel valve
TOGGLE_FUEL_VALVE_ENG2	Toggle engine 2 fuel valve
TOGGLE_FUEL_VALVE_ENG3	Toggle engine 3 fuel valve
TOGGLE_FUEL_VALVE_ENG4	Toggle engine 4 fuel valve
COWLFLAP1_SET	Sets engine 1 cowl flap lever position (0 to 16383)
COWLFLAP2_SET	Sets engine 2 cowl flap lever position (0 to 16383)
COWLFLAP3_SET	Sets engine 3 cowl flap lever position (0 to 16383)
COWLFLAP4_SET	Sets engine 4 cowl flap lever position (0 to 16383)
INC_COWL_FLAPS	Increment cowl flap levers
DEC_COWL_FLAPS	Decrement cowl flap levers
INC_COWL_FLAPS1	Increment engine 1 cowl flap lever
DEC_COWL_FLAPS1	Decrement engine 1 cowl flap lever
INC_COWL_FLAPS2	Increment engine 2 cowl flap lever
DEC_COWL_FLAPS2	Decrement engine 2 cowl flap lever
INC_COWL_FLAPS3	Increment engine 3 cowl flap lever
DEC_COWL_FLAPS3	Decrement engine 3 cowl flap lever
INC_COWL_FLAPS4	Increment engine 4 cowl flap lever
DEC_COWL_FLAPS4	Decrement engine 4 cowl flap lever
FUEL_PUMP	Toggle electric fuel pumps
TOGGLE_ELECT_FUEL_PUMP	Toggle electric fuel pumps
TOGGLE_ELECT_FUEL_PUMP1	Toggle engine 1 electric fuel pump
TOGGLE_ELECT_FUEL_PUMP2	Toggle engine 2 electric fuel pump
TOGGLE_ELECT_FUEL_PUMP3	Toggle engine 3 electric fuel pump
TOGGLE_ELECT_FUEL_PUMP4	Toggle engine 4 electric fuel pump
ENGINE_PRIMER	Trigger engine primers
TOGGLE_PRIMER	Trigger engine primers
TOGGLE_PRIMER1	Trigger engine 1 primer
TOGGLE_PRIMER2	Trigger engine 2 primer
TOGGLE_PRIMER3	Trigger engine 3 primer
TOGGLE_PRIMER4	Trigger engine 4 primer
TOGGLE_FEATHER_SWITCHES	Trigger propeller switches
TOGGLE_FEATHER_SWITCH_1	Trigger propeller 1 switch
TOGGLE_FEATHER_SWITCH_2	Trigger propeller 2 switch
TOGGLE_FEATHER_SWITCH_3	Trigger propeller 3 switch
TOGGLE_FEATHER_SWITCH_4	Trigger propeller 4 switch
TOGGLE_PROPELLER_SYNC	Turns propeller synchronization switch on
TOGGLE_AUTOFEATHER_ARM	Turns auto-feather arming switch on.
TOGGLE_AFTERBURNER	Toggles afterburners
TOGGLE_AFTERBURNER1	Toggles engine 1 afterburner
TOGGLE_AFTERBURNER2	Toggles engine 2 afterburner
TOGGLE_AFTERBURNER3	Toggles engine 3 afterburner
TOGGLE_AFTERBURNER4	Toggles engine 4 afterburner
ENGINE	Sets engines for 1,2,3,4 selection (to be followed by SELECT_n)
SPOILERS_TOGGLE	Toggles spoiler handle
FLAPS_UP	Sets flap handle to full retract position
FLAPS_1	Sets flap handle to first extension position
FLAPS_2	Sets flap handle to second extension position
FLAPS_3	Sets flap handle to third extension position
FLAPS_DOWN	Sets flap handle to full extension position
ELEV_TRIM_DN	Increments elevator trim down
ELEV_DOWN	Increments elevator down
AILERONS_LEFT	Increments ailerons left
CENTER_AILER_RUDDER	Centers aileron and rudder positions
AILERONS_RIGHT	Increments ailerons right
ELEV_TRIM_UP	Increment elevator trim up
ELEV_UP	Increments elevator up
RUDDER_LEFT	Increments rudder left
RUDDER_CENTER	Centers rudder position
RUDDER_RIGHT	Increments rudder right
ELEVATOR_SET	Sets elevator position (-16383 - +16383)
AILERON_SET	Sets aileron position (-16383 - +16383)
RUDDER_SET	Sets rudder position (-16383 - +16383)
FLAPS_INCR	Increments flap handle position
FLAPS_DECR	Decrements flap handle position
AXIS_ELEVATOR_SET	Sets elevator position (-16383 - +16383)
AXIS_AILERONS_SET	Sets aileron position (-16383 - +16383)
AXIS_RUDDER_SET	Sets rudder position (-16383 - +16383)
AXIS_ELEV_TRIM_SET	Sets elevator trim position (-16383 - +16383)
SPOILERS_SET	Sets spoiler handle position (0 to 16383)
SPOILERS_ARM_TOGGLE	Toggles arming of auto-spoilers
SPOILERS_ON	Sets spoiler handle to full extend position
SPOILERS_OFF	Sets spoiler handle to full retract position
SPOILERS_ARM_ON	Sets auto-spoiler arming on
SPOILERS_ARM_OFF	Sets auto-spoiler arming off
SPOILERS_ARM_SET	Sets auto-spoiler arming (0,1)
AILERON_TRIM_LEFT	Increments aileron trim left
AILERON_TRIM_RIGHT	Increments aileron trim right
RUDDER_TRIM_LEFT	Increments rudder trim left
RUDDER_TRIM_RIGHT	Increments aileron trim right
AXIS_SPOILER_SET	Sets spoiler handle position (-16383 - +16383)
FLAPS_SET	Sets flap handle to closest increment (0 to 16383)
ELEVATOR_TRIM_SET	Sets elevator trim position (0 to 16383)
AXIS_FLAPS_SET	Sets flap handle to closest increment (-16383 - +16383)
AP_MASTER	Toggles AP on/off
AUTOPILOT_OFF	Turns AP off
AUTOPILOT_ON	Turns AP on
YAW_DAMPER_TOGGLE	Toggles yaw damper on/off
AP_PANEL_HEADING_HOLD	Toggles heading hold mode on/off
AP_PANEL_ALTITUDE_HOLD	Toggles altitude hold mode on/off
AP_ATT_HOLD_ON	Turns on AP wing leveler and pitch hold mode
AP_LOC_HOLD_ON	Turns AP localizer hold on/armed and glide-slope hold mode off
AP_APR_HOLD_ON	Turns both AP localizer and glide-slope modes on/armed
AP_HDG_HOLD_ON	Turns heading hold mode on
AP_ALT_HOLD_ON	Turns altitude hold mode on
AP_WING_LEVELER_ON	Turns wing leveler mode on
AP_BC_HOLD_ON	Turns localizer back course hold mode on/armed
AP_NAV1_HOLD_ON	Turns lateral hold mode on
AP_ATT_HOLD_OFF	Turns off attitude hold mode
AP_LOC_HOLD_OFF	Turns off localizer hold mode
AP_APR_HOLD_OFF	Turns off approach hold mode
AP_HDG_HOLD_OFF	Turns off heading hold mode
AP_ALT_HOLD_OFF	Turns off altitude hold mode
AP_WING_LEVELER_OFF	Turns off wing leveler mode
AP_BC_HOLD_OFF	Turns off backcourse mode for localizer hold
AP_NAV1_HOLD_OFF	Turns off nav hold mode
AP_AIRSPEED_HOLD	Toggles airspeed hold mode
AUTO_THROTTLE_ARM	Toggles autothrottle arming mode
AUTO_THROTTLE_TO_GA	Toggles Takeoff/Go Around mode
HEADING_BUG_INC	Increments heading hold reference bug
HEADING_BUG_DEC	Decrements heading hold reference bug
HEADING_BUG_SET	Set heading hold reference bug (degrees)
AP_PANEL_SPEED_HOLD	Toggles airspeed hold mode
AP_ALT_VAR_INC	Increments reference altitude
AP_ALT_VAR_DEC	Decrements reference altitude
AP_VS_VAR_INC	Increments vertical speed reference
AP_VS_VAR_DEC	Decrements vertical speed reference
AP_SPD_VAR_INC	Increments airspeed hold reference
AP_SPD_VAR_DEC	Decrements airspeed hold reference
AP_PANEL_MACH_HOLD	Toggles mach hold
AP_MACH_VAR_INC	Increments reference mach
AP_MACH_VAR_DEC	Decrements reference mach
AP_MACH_HOLD	Toggles mach hold
AP_ALT_VAR_SET_METRIC	Sets reference altitude in meters
AP_VS_VAR_SET_ENGLISH	Sets reference vertical speed in feet per minute
AP_SPD_VAR_SET	Sets airspeed reference in knots
AP_MACH_VAR_SET	Sets mach reference
YAW_DAMPER_ON	Turns yaw damper on
YAW_DAMPER_OFF	Turns yaw damper off
YAW_DAMPER_SET	Sets yaw damper on/off (1,0)
AP_AIRSPEED_ON	Turns airspeed hold on
AP_AIRSPEED_OFF	Turns airspeed hold off
AP_AIRSPEED_SET	Sets airspeed hold on/off (1,0)
AP_MACH_ON	Turns mach hold on
AP_MACH_OFF	Turns mach hold off
AP_MACH_SET	Sets mach hold on/off (1,0)
AP_PANEL_ALTITUDE_ON	Turns altitude hold mode on (without capturing current altitude)
AP_PANEL_ALTITUDE_OFF	Turns altitude hold mode off
AP_PANEL_ALTITUDE_SET	Sets altitude hold mode on/off (1,0)
AP_PANEL_HEADING_ON	Turns heading mode on (without capturing current heading)
AP_PANEL_HEADING_OFF	Turns heading mode off
AP_PANEL_HEADING_SET	Set heading mode on/off (1,0)
AP_PANEL_MACH_ON	Turns on mach hold
AP_PANEL_MACH_OFF	Turns off mach hold
AP_PANEL_MACH_SET	Sets mach hold on/off (1,0)
AP_PANEL_SPEED_ON	Turns on speed hold mode
AP_PANEL_SPEED_OFF	Turns off speed hold mode
AP_PANEL_SPEED_SET	Set speed hold mode on/off (1,0)
AP_ALT_VAR_SET_ENGLISH	Sets altitude reference in feet
AP_VS_VAR_SET_METRIC	Sets vertical speed reference in meters per minute
TOGGLE_FLIGHT_DIRECTOR	Toggles flight director on/off
SYNC_FLIGHT_DIRECTOR_PITCH	Synchronizes flight director pitch with current aircraft pitch
INCREASE_AUTOBRAKE_CONTROL	Increments autobrake level
DECREASE_AUTOBRAKE_CONTROL	Decrements autobrake level
AP_PANEL_SPEED_HOLD_TOGGLE	Turns airspeed hold mode on with current airspeed
AP_PANEL_MACH_HOLD_TOGGLE	Sets mach hold reference to current mach
AP_NAV_SELECT_SET	Sets the nav (1 or 2) which is used by the Nav hold modes
HEADING_BUG_SELECT	Selects the heading bug for use with +/-
ALTITUDE_BUG_SELECT	Selects the altitude reference for use with +/-
VSI_BUG_SELECT	Selects the vertical speed reference for use with +/-
AIRSPEED_BUG_SELECT	Selects the airspeed reference for use with +/-
AP_PITCH_REF_INC_UP	Increments the pitch reference for pitch hold mode
AP_PITCH_REF_INC_DN	Decrements the pitch reference for pitch hold mode
AP_PITCH_REF_SELECT	Selects pitch reference for use with +/-
AP_ATT_HOLD	Toggle attitude hold mode
AP_LOC_HOLD	Toggles localizer (only) hold mode
AP_APR_HOLD	Toggles approach hold (localizer and glide-slope)
AP_HDG_HOLD	Toggles heading hold mode
AP_ALT_HOLD	Toggles altitude hold mode
AP_WING_LEVELER	Toggles wing leveler mode
AP_BC_HOLD	Toggles the backcourse mode for the localizer hold
AP_NAV1_HOLD	Toggles the nav hold mode
FUEL_SELECTOR_OFF	Turns selector 1 to OFF position
FUEL_SELECTOR_ALL	Turns selector 1 to ALL position
FUEL_SELECTOR_LEFT	Turns selector 1 to LEFT position (burns from tip then aux then main)
FUEL_SELECTOR_RIGHT	Turns selector 1 to RIGHT position (burns from tip then aux then main)
FUEL_SELECTOR_LEFT_AUX	Turns selector 1 to LEFT AUX position
FUEL_SELECTOR_RIGHT_AUX	Turns selector 1 to RIGHT AUX position
FUEL_SELECTOR_CENTER	Turns selector 1 to CENTER position
FUEL_SELECTOR_SET	Sets selector 1 position (see code list below)
FUEL_SELECTOR_2_OFF	Turns selector 2 to OFF position
FUEL_SELECTOR_2_ALL	Turns selector 2 to ALL position
FUEL_SELECTOR_2_LEFT	Turns selector 2 to LEFT position (burns from tip then aux then main)
FUEL_SELECTOR_2_RIGHT	Turns selector 2 to RIGHT position (burns from tip then aux then main)
FUEL_SELECTOR_2_LEFT_AUX	Turns selector 2 to LEFT AUX position
FUEL_SELECTOR_2_RIGHT_AUX	Turns selector 2 to RIGHT AUX position
FUEL_SELECTOR_2_CENTER	Turns selector 2 to CENTER position
FUEL_SELECTOR_2_SET	Sets selector 2 position (see code list below)
FUEL_SELECTOR_3_OFF	Turns selector 3 to OFF position
FUEL_SELECTOR_3_ALL	Turns selector 3 to ALL position
FUEL_SELECTOR_3_LEFT	Turns selector 3 to LEFT position (burns from tip then aux then main)
FUEL_SELECTOR_3_RIGHT	Turns selector 3 to RIGHT position (burns from tip then aux then main)
FUEL_SELECTOR_3_LEFT_AUX	Turns selector 3 to LEFT AUX position
FUEL_SELECTOR_3_RIGHT_AUX	Turns selector 3 to RIGHT AUX position
FUEL_SELECTOR_3_CENTER	Turns selector 3 to CENTER position
FUEL_SELECTOR_3_SET	Sets selector 3 position (see code list below)
FUEL_SELECTOR_4_OFF	Turns selector 4 to OFF position
FUEL_SELECTOR_4_ALL	Turns selector 4 to ALL position
FUEL_SELECTOR_4_LEFT	Turns selector 4 to LEFT position (burns from tip then aux then main)
FUEL_SELECTOR_4_RIGHT	Turns selector 4 to RIGHT position (burns from tip then aux then main)
FUEL_SELECTOR_4_LEFT_AUX	Turns selector 4 to LEFT AUX position
FUEL_SELECTOR_4_RIGHT_AUX	Turns selector 4 to RIGHT AUX position
FUEL_SELECTOR_4_CENTER	Turns selector 4 to CENTER position
FUEL_SELECTOR_4_SET	Sets selector 4 position (see code list below)
CROSS_FEED_OPEN	Opens cross feed valve (when used in conjunction with 'isolate' tank)
CROSS_FEED_TOGGLE	Toggles crossfeed valve (when used in conjunction with 'isolate' tank)
CROSS_FEED_OFF	Closes crossfeed valve (when used in conjunction with 'isolate' tank)
XPNDR	Sequentially selects the transponder digits for use with +/-.
ADF	Sequentially selects the ADF tuner digits for use with +/-. Follow by KEY_SELECT_2 for ADF 2.
DME	Selects the DME for use with +/-
COM_RADIO	Sequentially selects the COM tuner digits for use with +/-. Follow by KEY_SELECT_2 for COM 2.
VOR_OBS	Sequentially selects the VOR OBS for use with +/-. Follow by KEY_SELECT_2 for VOR 2.
NAV_RADIO	Sequentially selects the NAV tuner digits for use with +/-. Follow by KEY_SELECT_2 for NAV 2.
COM_RADIO_WHOLE_DEC	Decrements COM by one MHz
COM_RADIO_WHOLE_INC	Increments COM by one MHz
COM_RADIO_FRACT_DEC	Decrements COM by 25 KHz
COM_RADIO_FRACT_INC	Increments COM by 25 KHz
NAV1_RADIO_WHOLE_DEC	Decrements Nav 1 by one MHz
NAV1_RADIO_WHOLE_INC	Increments Nav 1 by one MHz
NAV1_RADIO_FRACT_DEC	Decrements Nav 1 by 25 KHz
NAV1_RADIO_FRACT_INC	Increments Nav 1 by 25 KHz
NAV2_RADIO_WHOLE_DEC	Decrements Nav 2 by one MHz
NAV2_RADIO_WHOLE_INC	Increments Nav 2 by one MHz
NAV2_RADIO_FRACT_DEC	Decrements Nav 2 by 25 KHz
NAV2_RADIO_FRACT_INC	Increments Nav 2 by 25 KHz
ADF_100_INC	Increments ADF by 100 KHz
ADF_10_INC	Increments ADF by 10 KHz
ADF_1_INC	Increments ADF by 1 KHz
XPNDR_1000_INC	Increments first digit of transponder
XPNDR_100_INC	Increments second digit of transponder
XPNDR_10_INC	Increments third digit of transponder
XPNDR_1_INC	Increments fourth digit of transponder
VOR1_OBI_DEC	Decrements the VOR 1 OBS setting
VOR1_OBI_INC	Increments the VOR 1 OBS setting
VOR2_OBI_DEC	Decrements the VOR 2 OBS setting
VOR2_OBI_INC	Increments the VOR 2 OBS setting
ADF_100_DEC	Decrements ADF by 100 KHz
ADF_10_DEC	Decrements ADF by 10 KHz
ADF_1_DEC	Decrements ADF by 1 KHz
COM_RADIO_SET	Sets COM frequency (BCD Hz)
NAV1_RADIO_SET	Sets NAV 1 frequency (BCD Hz)
NAV2_RADIO_SET	Sets NAV 2 frequency (BCD Hz)
ADF_SET	Sets ADF frequency (BCD Hz)
XPNDR_SET	Sets transponder code (BCD)
VOR1_SET	Sets OBS 1 (0 to 360)
VOR2_SET	Sets OBS 2 (0 to 360)
DME1_TOGGLE	Sets DME display to Nav 1
DME2_TOGGLE	Sets DME display to Nav 2
RADIO_VOR1_IDENT_DISABLE	Turns NAV 1 ID off
RADIO_VOR2_IDENT_DISABLE	Turns NAV 2 ID off
RADIO_DME1_IDENT_DISABLE	Turns DME 1 ID off
RADIO_DME2_IDENT_DISABLE	Turns DME 2 ID off
RADIO_ADF_IDENT_DISABLE	Turns ADF 1 ID off
RADIO_VOR1_IDENT_ENABLE	Turns NAV 1 ID on
RADIO_VOR2_IDENT_ENABLE	Turns NAV 2 ID on
RADIO_DME1_IDENT_ENABLE	Turns DME 1 ID on
RADIO_DME2_IDENT_ENABLE	Turns DME 2 ID on
RADIO_ADF_IDENT_ENABLE	Turns ADF 1 ID on
RADIO_VOR1_IDENT_TOGGLE	Toggles NAV 1 ID
RADIO_VOR2_IDENT_TOGGLE	Toggles NAV 2 ID
RADIO_DME1_IDENT_TOGGLE	Toggles DME 1 ID
RADIO_DME2_IDENT_TOGGLE	Toggles DME 2 ID
RADIO_ADF_IDENT_TOGGLE	Toggles ADF 1 ID
RADIO_VOR1_IDENT_SET	Sets NAV 1 ID (on/off)
RADIO_VOR2_IDENT_SET	Sets NAV 2 ID (on/off)
RADIO_DME1_IDENT_SET	Sets DME 1 ID (on/off)
RADIO_DME2_IDENT_SET	Sets DME 2 ID (on/off)
RADIO_ADF_IDENT_SET	Sets ADF 1 ID (on/off)
ADF_CARD_INC	Increments ADF card
ADF_CARD_DEC	Decrements ADF card
ADF_CARD_SET	Sets ADF card (0-360)
TOGGLE_DME	Toggles between NAV 1 and NAV 2
AVIONICS_MASTER_SET	Sets the avionics master switch
TOGGLE_AVIONICS_MASTER	Toggles the avionics master switch
COM_STBY_RADIO_SET	Sets COM 1 standby frequency (BCD Hz)
COM_STBY_RADIO_SWAP	Swaps COM 1 frequency with standby
COM_RADIO_FRACT_DEC_CARRY	Decrement COM 1 frequency by 25 KHz, and carry when digit wraps
COM_RADIO_FRACT_INC_CARRY	Increment COM 1 frequency by 25 KHz, and carry when digit wraps
COM2_RADIO_WHOLE_DEC	Decrement COM 2 frequency by 1 MHz, with no carry when digit wraps
COM2_RADIO_WHOLE_INC	Increment COM 2 frequency by 1 MHz, with no carry when digit wraps
COM2_RADIO_FRACT_DEC	Decrement COM 2 frequency by 25 KHz, with no carry when digit wraps
COM2_RADIO_FRACT_DEC_CARRY	Decrement COM 2 frequency by 25 KHz, and carry when digit wraps
COM2_RADIO_FRACT_INC	Increment COM 2 frequency by 25 KHz, with no carry when digit wraps
COM2_RADIO_FRACT_INC_CARRY	Increment COM 2 frequency by 25 KHz, and carry when digit wraps
COM2_RADIO_SET	Sets COM 2 frequency (BCD Hz)
COM2_STBY_RADIO_SET	Sets COM 2 standby frequency (BCD Hz)
COM2_RADIO_SWAP	Swaps COM 2 frequency with standby
NAV1_RADIO_FRACT_DEC_CARRY	Decrement NAV 1 frequency by 50 KHz, and carry when digit wraps
NAV1_RADIO_FRACT_INC_CARRY	Increment NAV 1 frequency by 50 KHz, and carry when digit wraps
NAV1_STBY_SET	Sets NAV 1 standby frequency (BCD Hz)
NAV1_RADIO_SWAP	Swaps NAV 1 frequency with standby
NAV2_RADIO_FRACT_DEC_CARRY	Decrement NAV 2 frequency by 50 KHz, and carry when digit wraps
NAV2_RADIO_FRACT_INC_CARRY	Increment NAV 2 frequency by 50 KHz, and carry when digit wraps
NAV2_STBY_SET	Sets NAV 2 standby frequency (BCD Hz)
NAV2_RADIO_SWAP	Swaps NAV 2 frequency with standby
ADF1_RADIO_TENTHS_DEC	Decrements ADF 1 by 0.1 KHz.
ADF1_RADIO_TENTHS_INC	Increments ADF 1 by 0.1 KHz.
XPNDR_1000_DEC	Decrements first digit of transponder
XPNDR_100_DEC	Decrements second digit of transponder
XPNDR_10_DEC	Decrements third digit of transponder
XPNDR_1_DEC	Decrements fourth digit of transponder
XPNDR_DEC_CARRY	Decrements fourth digit of transponder, and with carry.
XPNDR_INC_CARRY	Increments fourth digit of transponder, and with carry.
ADF_FRACT_DEC_CARRY	Decrements ADF 1 frequency by 0.1 KHz, with carry
ADF_FRACT_INC_CARRY	Increments ADF 1 frequency by 0.1 KHz, with carry
COM1_TRANSMIT_SELECT	Selects COM 1 to transmit
COM2_TRANSMIT_SELECT	Selects COM 2 to transmit
COM_RECEIVE_ALL_TOGGLE	Toggles all COM radios to receive on
COM_RECEIVE_ALL_SET	Sets whether to receive on all COM radios (1,0)
MARKER_SOUND_TOGGLE	Toggles marker beacon sound on/off
ADF_COMPLETE_SET	Sets ADF 1 frequency (BCD Hz)
ADF1_WHOLE_INC	Increments ADF 1 by 1 KHz, with carry as digits wrap.
ADF1_WHOLE_DEC	Decrements ADF 1 by 1 KHz, with carry as digits wrap.
ADF2_100_INC	Increments the ADF 2 frequency 100 digit, with wrapping
ADF2_10_INC	Increments the ADF 2 frequency 10 digit, with wrapping
ADF2_1_INC	Increments the ADF 2 frequency 1 digit, with wrapping
ADF2_RADIO_TENTHS_INC	Increments ADF 2 frequency 1/10 digit, with wrapping
ADF2_100_DEC	Decrements the ADF 2 frequency 100 digit, with wrapping
ADF2_10_DEC	Decrements the ADF 2 frequency 10 digit, with wrapping
ADF2_1_DEC	Decrements the ADF 2 frequency 1 digit, with wrapping
ADF2_RADIO_TENTHS_DEC	Decrements ADF 2 frequency 1/10 digit, with wrapping
ADF2_WHOLE_INC	Increments ADF 2 by 1 KHz, with carry as digits wrap.
ADF2_WHOLE_DEC	Decrements ADF 2 by 1 KHz, with carry as digits wrap.
ADF2_FRACT_DEC_CARRY	Decrements ADF 2 frequency by 0.1 KHz, with carry
ADF2_FRACT_INC_CARRY	Increments ADF 2 frequency by 0.1 KHz, with carry
ADF2_COMPLETE_SET	Sets ADF 1 frequency (BCD Hz)
RADIO_ADF2_IDENT_DISABLE	Turns ADF 2 ID off
RADIO_ADF2_IDENT_ENABLE	Turns ADF 2 ID on
RADIO_ADF2_IDENT_TOGGLE	Toggles ADF 2 ID
RADIO_ADF2_IDENT_SET	Sets ADF 2 ID on/off (1,0)
FREQUENCY_SWAP	Swaps frequency with standby on whichever NAV or COM radio is selected.
TOGGLE_GPS_DRIVES_NAV1	Toggles between GPS and NAV 1 driving NAV 1 OBS display (and AP)
GPS_POWER_BUTTON	Toggles power button
GPS_NEAREST_BUTTON	Selects Nearest Airport Page
GPS_OBS_BUTTON	Toggles automatic sequencing of waypoints
GPS_MSG_BUTTON	Toggles the Message Page
GPS_MSG_BUTTON_DOWN	Triggers the pressing of the message button.
GPS_MSG_BUTTON_UP	Triggers the release of the message button
GPS_FLIGHTPLAN_BUTTON	Displays the programmed flightplan.
GPS_TERRAIN_BUTTON	Displays terrain information on default display
GPS_PROCEDURE_BUTTON	Displays the approach procedure page.
GPS_ZOOMIN_BUTTON	Zooms in default display
GPS_ZOOMOUT_BUTTON	Zooms out default display
GPS_DIRECTTO_BUTTON	Brings up the 'Direct To' page
GPS_MENU_BUTTON	Brings up page to select active legs in a flightplan.
GPS_CLEAR_BUTTON	Clears entered data on a page
GPS_CLEAR_ALL_BUTTON	Clears all data immediately
GPS_CLEAR_BUTTON_DOWN	Triggers the pressing of the Clear button
GPS_CLEAR_BUTTON_UP	Triggers the release of the Clear button.
GPS_ENTER_BUTTON	Approves entered data.
GPS_CURSOR_BUTTON	Selects GPS cursor
GPS_GROUP_KNOB_INC	Increments cursor
GPS_GROUP_KNOB_DEC	Decrements cursor
GPS_PAGE_KNOB_INC	Increments through pages
GPS_PAGE_KNOB_DEC	Decrements through pages
EGT	Selects EGT bug for +/-
EGT_INC	Increments EGT bugs
EGT_DEC	Decrements EGT bugs
EGT_SET	Sets EGT bugs (0 to 32767)
BAROMETRIC	Syncs altimeter setting to sea level pressure, or 29.92 if above 18000 feet
GYRO_DRIFT_INC	Increments heading indicator
GYRO_DRIFT_DEC	Decrements heading indicator
KOHLSMAN_INC	Increments altimeter setting
KOHLSMAN_DEC	Decrements altimeter setting
KOHLSMAN_SET	Sets altimeter setting (Millibars * 16)
TRUE_AIRSPEED_CAL_INC	Increments airspeed indicators true airspeed reference card
TRUE_AIRSPEED_CAL_DEC	Decrements airspeed indicators true airspeed reference card
TRUE_AIRSPEED_CAL_SET	Sets airspeed indicators true airspeed reference card (degrees, where 0 is standard sea level conditions)
EGT1_INC	Increments EGT bug 1
EGT1_DEC	Decrements EGT bug 1
EGT1_SET	Sets EGT bug 1 (0 to 32767)
EGT2_INC	Increments EGT bug 2
EGT2_DEC	Decrements EGT bug 2
EGT2_SET	Sets EGT bug 2 (0 to 32767)
EGT3_INC	Increments EGT bug 3
EGT3_DEC	Decrements EGT bug 3
EGT3_SET	Sets EGT bug 3 (0 to 32767)
EGT4_INC	Increments EGT bug 4
EGT4_DEC	Decrements EGT bug 4
EGT4_SET	Sets EGT bug 4 (0 to 32767)
ATTITUDE_BARS_POSITION_UP	Increments attitude indicator pitch reference bars
ATTITUDE_BARS_POSITION_DOWN	Decrements attitude indicator pitch reference bars
ATTITUDE_CAGE_BUTTON	Cages attitude indicator at 0 pitch and bank
RESET_G_FORCE_INDICATOR	Resets max/min indicated G force to 1.0.
RESET_MAX_RPM_INDICATOR	Reset max indicated engine rpm to 0.
HEADING_GYRO_SET	Sets heading indicator to 0 drift error.
GYRO_DRIFT_SET	Sets heading indicator drift angle (degrees).
STROBES_TOGGLE	Toggle strobe lights
ALL_LIGHTS_TOGGLE	Toggle all lights
PANEL_LIGHTS_TOGGLE	Toggle panel lights
LANDING_LIGHTS_TOGGLE	Toggle landing lights
LANDING_LIGHT_UP	Rotate landing light up
LANDING_LIGHT_DOWN	Rotate landing light down
LANDING_LIGHT_LEFT	Rotate landing light left
LANDING_LIGHT_RIGHT	Rotate landing light right
LANDING_LIGHT_HOME	Return landing light to default position
STROBES_ON	Turn strobe lights on
STROBES_OFF	Turn strobe light off
STROBES_SET	Set strobe lights on/off (1,0)
PANEL_LIGHTS_ON	Turn panel lights on
PANEL_LIGHTS_OFF	Turn panel lights off
PANEL_LIGHTS_SET	Set panel lights on/off (1,0)
LANDING_LIGHTS_ON	Turn landing lights on
LANDING_LIGHTS_OFF	Turn landing lights off
LANDING_LIGHTS_SET	Set landing lights on/off (1,0)
TOGGLE_BEACON_LIGHTS	Toggle beacon lights
TOGGLE_TAXI_LIGHTS	Toggle taxi lights
TOGGLE_LOGO_LIGHTS	Toggle logo lights
TOGGLE_RECOGNITION_LIGHTS	Toggle recognition lights
TOGGLE_WING_LIGHTS	Toggle wing lights
TOGGLE_NAV_LIGHTS	Toggle navigation lights
TOGGLE_CABIN_LIGHTS	Toggle cockpit/cabin lights
TOGGLE_VACUUM_FAILURE	Toggle vacuum system failure
TOGGLE_ELECTRICAL_FAILURE	Toggle electrical system failure
TOGGLE_PITOT_BLOCKAGE	Toggles blocked pitot tube
TOGGLE_STATIC_PORT_BLOCKAGE	Toggles blocked static port
TOGGLE_HYDRAULIC_FAILURE	Toggles hydraulic system failure
TOGGLE_TOTAL_BRAKE_FAILURE	Toggles brake failure (both)
TOGGLE_LEFT_BRAKE_FAILURE	Toggles left brake failure
TOGGLE_RIGHT_BRAKE_FAILURE	Toggles right brake failure
TOGGLE_ENGINE1_FAILURE	Toggle engine 1 failure
TOGGLE_ENGINE2_FAILURE	Toggle engine 2 failure
TOGGLE_ENGINE3_FAILURE	Toggle engine 3 failure
TOGGLE_ENGINE4_FAILURE	Toggle engine 4 failure
SMOKE_TOGGLE	Toggle smoke system switch
GEAR_TOGGLE	Toggle gear handle
BRAKES	Increment brake pressure
GEAR_SET	Sets gear handle position up/down (0,1)
BRAKES_LEFT	Increments left brake pressure
BRAKES_RIGHT	Increments right brake pressure
PARKING_BRAKES	Toggles parking brake on/off
GEAR_PUMP	Increments emergency gear extension
PITOT_HEAT_TOGGLE	Toggles pitot heat switch
SMOKE_ON	Turns smoke system on
SMOKE_OFF	Turns smoke system off
SMOKE_SET	Sets smoke system on/off (1,0)
PITOT_HEAT_ON	Turns pitot heat switch on
PITOT_HEAT_OFF	Turns pitot heat switch off
PITOT_HEAT_SET	Sets pitot heat switch on/off (1,0)
GEAR_UP	Sets gear handle in UP position
GEAR_DOWN	Sets gear handle in DOWN position
TOGGLE_MASTER_BATTERY	Toggles main battery switch
TOGGLE_MASTER_ALTERNATOR	Toggles main alternator/generator switch
TOGGLE_ELECTRIC_VACUUM_PUMP	Toggles backup electric vacuum pump
TOGGLE_ALTERNATE_STATIC	Toggles alternate static pressure port
DECREASE_DECISION_HEIGHT	Decrements decision height reference
INCREASE_DECISION_HEIGHT	Increments decision height reference
TOGGLE_STRUCTURAL_DEICE	Toggles structural deice switch
TOGGLE_PROPELLER_DEICE	Toggles propeller deice switch
TOGGLE_ALTERNATOR1	Toggles alternator/generator 1 switch
TOGGLE_ALTERNATOR2	Toggles alternator/generator 2 switch
TOGGLE_ALTERNATOR3	Toggles alternator/generator 3 switch
TOGGLE_ALTERNATOR4	Toggles alternator/generator 4 switch
TOGGLE_MASTER_BATTERY_ALTERNATOR	Toggles master battery and alternator switch
AXIS_LEFT_BRAKE_SET	Sets left brake position from axis controller (e.g. joystick). -16383 (0 brakes) to +16383 (max brakes)
AXIS_RIGHT_BRAKE_SET	Sets right brake position from axis controller (e.g. joystick). -16383 (0 brakes) to +16383 (max brakes)
TOGGLE_AIRCRAFT_EXIT	Toggles primary door open/close. Follow by KEY_SELECT_2, etc for subsequent doors.
TOGGLE_WING_FOLD	Toggles wing folding
SET_WING_FOLD	Sets the wings into the folded position suitable for storage, typically on a carrier. Takes a value:1 - fold wings,0 - unfold wings
TOGGLE_TAIL_HOOK_HANDLE	Toggles tail hook
SET_TAIL_HOOK_HANDLE	Sets the tail hook handle. Takes a value:1 - set tail hook,0 - retract tail hook
TOGGLE_WATER_RUDDER	Toggles water rudders
TOGGLE_PUSHBACK	Toggles pushback.
KEY_TUG_HEADING	Triggers tug and sets the desired heading. The units are a 32 bit integer (0 to 4294967295) which represent 0 to 360 degrees. To set a 45 degree angle, for example, set the value to 4294967295 / 8.
KEY_TUG_SPEED	Triggers tug, and sets desired speed, in feet per second. The speed can be both positive (forward movement) and negative (backward movement).
TUG_DISABLE	Disables tug
TOGGLE_MASTER_IGNITION_SWITCH	Toggles master ignition switch
TOGGLE_TAILWHEEL_LOCK	Toggles tail wheel lock
ADD_FUEL_QUANTITY	Adds fuel to the aircraft, 25% of capacity by default. 0 to 65535 (max fuel) can be passed.
ROTOR_BRAKE	Triggers rotor braking input
ROTOR_CLUTCH_SWITCH_TOGGLE	Toggles on electric rotor clutch switch
ROTOR_CLUTCH_SWITCH_SET	Sets electric rotor clutch switch on/off (1,0)
ROTOR_GOV_SWITCH_TOGGLE	Toggles the electric rotor governor switch
ROTOR_GOV_SWITCH_SET	Sets the electric rotor governor switch on/off (1,0)
ROTOR_LATERAL_TRIM_INC	Increments the lateral (right) rotor trim
ROTOR_LATERAL_TRIM_DEC	Decrements the lateral (right) rotor trim
ROTOR_LATERAL_TRIM_SET	Sets the lateral (right) rotor trim (0 to 16383)
SLEW_TOGGLE	Toggles slew on/off
SLEW_OFF	Turns slew off
SLEW_ON	Turns slew on
SLEW_SET	Sets slew on/off (1,0)
SLEW_RESET	Stop slew and reset pitch, bank, and heading all to zero.
SLEW_ALTIT_UP_FAST	Slew upward fast
SLEW_ALTIT_UP_SLOW	Slew upward slow
SLEW_ALTIT_FREEZE	Stop vertical slew
SLEW_ALTIT_DN_SLOW	Slew downward slow
SLEW_ALTIT_DN_FAST	Slew downward fast
SLEW_ALTIT_PLUS	Increase upward slew
SLEW_ALTIT_MINUS	Decrease upward slew
SLEW_PITCH_DN_FAST	Slew pitch downward fast
SLEW_PITCH_DN_SLOW	Slew pitch downward slow
SLEW_PITCH_FREEZE	Stop pitch slew
SLEW_PITCH_UP_SLOW	Slew pitch up slow
SLEW_PITCH_UP_FAST	Slew pitch upward fast
SLEW_PITCH_PLUS	Increase pitch up slew
SLEW_PITCH_MINUS	Decrease pitch up slew
SLEW_BANK_MINUS	Increase left bank slew
SLEW_AHEAD_PLUS	Increase forward slew
SLEW_BANK_PLUS	Increase right bank slew
SLEW_LEFT	Slew to the left
SLEW_FREEZE	Stop all slew
SLEW_RIGHT	Slew to the right
SLEW_HEADING_MINUS	Increase slew heading to the left
SLEW_AHEAD_MINUS	Decrease forward slew
SLEW_HEADING_PLUS	Increase slew heading to the right
AXIS_SLEW_AHEAD_SET	Sets forward slew (+/- 16383)
AXIS_SLEW_SIDEWAYS_SET	Sets sideways slew (+/- 16383)
AXIS_SLEW_HEADING_SET	Sets heading slew (+/- 16383)
AXIS_SLEW_ALT_SET	Sets vertical slew (+/- 16383)
AXIS_SLEW_BANK_SET	Sets roll slew (+/- 16383)
AXIS_SLEW_PITCH_SET	Sets pitch slew (+/- 16383)
VIEW_MODE	Selects next view
VIEW_WINDOW_TO_FRONT	Sets active window to front
VIEW_RESET	Resets the view to the default
VIEW_ALWAYS_PAN_UP
VIEW_ALWAYS_PAN_DOWN
NEXT_SUB_VIEW
PREV_SUB_VIEW
VIEW_TRACK_PAN_TOGGLE
VIEW_PREVIOUS_TOGGLE
VIEW_CAMERA_SELECT_START
PANEL_HUD_NEXT
PANEL_HUD_PREVIOUS
ZOOM_IN	Zooms view in
ZOOM_OUT	Zooms view out
MAP_ZOOM_FINE_IN	Fine zoom in map view
PAN_LEFT	Pans view left
PAN_RIGHT	Pans view right
MAP_ZOOM_FINE_OUT	Fine zoom out in map view
VIEW_FORWARD	Sets view direction forward
VIEW_FORWARD_RIGHT	Sets view direction forward and right
VIEW_RIGHT	Sets view direction to the right
VIEW_REAR_RIGHT	Sets view direction to the rear and right
VIEW_REAR	Sets view direction to the rear
VIEW_REAR_LEFT	Sets view direction to the rear and left
VIEW_LEFT	Sets view direction to the left
VIEW_FORWARD_LEFT	Sets view direction forward and left
VIEW_DOWN	Sets view direction down
ZOOM_MINUS	Decreases zoom
ZOOM_PLUS	Increase zoom
PAN_UP	Pan view up
PAN_DOWN	Pan view down
VIEW_MODE_REV	Reverse view cycle
ZOOM_IN_FINE	Zoom in fine
ZOOM_OUT_FINE	Zoom out fine
CLOSE_VIEW	Close current view
NEW_VIEW	Open new view
NEXT_VIEW	Select next view
PREV_VIEW	Select previous view
PAN_LEFT_UP	Pan view left
PAN_LEFT_DOWN	Pan view left and down
PAN_RIGHT_UP	Pan view right and up
PAN_RIGHT_DOWN	Pan view right and down
PAN_TILT_LEFT	Tilt view left
PAN_TILT_RIGHT	Tilt view right
PAN_RESET	Reset view to forward
VIEW_FORWARD_UP	Sets view forward and up
VIEW_FORWARD_RIGHT_UP	Sets view forward, right, and up
VIEW_RIGHT_UP	Sets view right and up
VIEW_REAR_RIGHT_UP	Sets view rear, right, and up
VIEW_REAR_UP	Sets view rear and up
VIEW_REAR_LEFT_UP	Sets view rear left and up
VIEW_LEFT_UP	Sets view left and up
VIEW_FORWARD_LEFT_UP	Sets view forward left and up
VIEW_UP	Sets view up
VIEW_RESET	Resets the view to the default
PAN_RESET_COCKPIT	Reset panning to forward, if in cockpit view
KEY_CHASE_VIEW_NEXT	Cycle view to next target
KEY_CHASE_VIEW_PREV	Cycle view to previous target
CHASE_VIEW_TOGGLE	Toggles chase view on/off
EYEPOINT_UP	Move eyepoint up
EYEPOINT_DOWN	Move eyepoint down
EYEPOINT_RIGHT	Move eyepoint right
EYEPOINT_LEFT	Move eyepoint left
EYEPOINT_FORWARD	Move eyepoint forward
EYEPOINT_BACK	Move eyepoint backward
EYEPOINT_RESET	Move eyepoint to default position
NEW_MAP	Opens new map view
PAUSE_TOGGLE	Toggles pause on/off
PAUSE_ON	Turns pause on
PAUSE_OFF	Turns pause off
PAUSE_SET	Sets pause on/off (1,0)
DEMO_STOP	Stops demo system playback
SELECT_1	Sets 'selected' index (for other events) to 1
SELECT_2	Sets 'selected' index (for other events) to 2
SELECT_3	Sets 'selected' index (for other events) to 3
SELECT_4	Sets 'selected' index (for other events) to 4
MINUS	Used in conjunction with 'selected' parameters to decrease their value (e.g., radio frequency)
PLUS	Used in conjunction with 'selected' parameters to increase their value (e.g., radio frequency)
ZOOM_1X	Sets zoom level to 1
SOUND_TOGGLE	Toggles sound on/off
SIM_RATE	Selects simulation rate (use KEY_MINUS, KEY_PLUS to change)
JOYSTICK_CALIBRATE	Toggles joystick on/off
SITUATION_SAVE	Saves flight situation
SITUATION_RESET	Resets flight situation
SOUND_SET	Sets sound on/off (1,0)
EXIT	Quit ESP with a message
ABORT	Quit ESP without a message
READOUTS_SLEW	Cycle through information readouts while in slew
READOUTS_FLIGHT	Cycle through information readouts
MINUS_SHIFT	Used with other events
PLUS_SHIFT	Used with other events
SIM_RATE_INCR	Increase sim rate
SIM_RATE_DECR	Decrease sim rate
KNEEBOARD_VIEW	Toggles kneeboard
PANEL_1	Toggles panel 1
PANEL_2	Toggles panel 2
PANEL_3	Toggles panel 3
PANEL_4	Toggles panel 4
PANEL_5	Toggles panel 5
PANEL_6	Toggles panel 6
PANEL_7	Toggles panel 7
PANEL_8	Toggles panel 8
PANEL_9	Toggles panel 9
SOUND_ON	Turns sound on
SOUND_OFF	Turns sound off
INVOKE_HELP	Brings up Help system
TOGGLE_AIRCRAFT_LABELS	Toggles aircraft labels
FLIGHT_MAP	Brings up flight map
RELOAD_PANELS	Reload panel data
PANEL_ID_TOGGLE	Toggles indexed panel (1 to 9)
PANEL_ID_OPEN	Opens indexed panel (1 to 9)
PANEL_ID_CLOSE	Closes indexed panel (1 to 9)
RELOAD_USER_AIRCRAFT	Reloads the user aircraft data (from cache if same type loaded as an AI, otherwise from disk)
SIM_RESET	Resets aircraft state
VIRTUAL_COPILOT_TOGGLE	Turns Flying Tips on/off
VIRTUAL_COPILOT_SET	Sets Flying Tips on/off (1,0)
VIRTUAL_COPILOT_ACTION	Triggers action noted in Flying Tips
REFRESH_SCENERY	Reloads scenery
CLOCK_HOURS_DEC	Decrements time by hours
CLOCK_HOURS_INC	Increments time by hours
CLOCK_MINUTES_DEC	Decrements time by minutes
CLOCK_MINUTES_INC	Increments time by minutes
CLOCK_SECONDS_ZERO	Zeros seconds
CLOCK_HOURS_SET	Sets hour of day
CLOCK_MINUTES_SET	Sets minutes of the hour
ZULU_HOURS_SET	Sets hours, zulu time
ZULU_MINUTES_SET	Sets minutes, in zulu time
ZULU_DAY_SET	Sets day, in zulu time
ZULU_YEAR_SET	Sets year, in zulu time
ATC	Activates ATC window
ATC_MENU_1	Selects ATC option 1
ATC_MENU_2	Selects ATC option 2
ATC_MENU_3	Selects ATC option 3
ATC_MENU_4	Selects ATC option 4
ATC_MENU_5	Selects ATC option 5
ATC_MENU_6	Selects ATC option 6
ATC_MENU_7	Selects ATC option 7
ATC_MENU_8	Selects ATC option 8
ATC_MENU_9	Selects ATC option 9
ATC_MENU_0	Selects ATC option 10
MP_TRANSFER_CONTROL	Toggle to the next player to track
MP_PLAYER_CYCLE	Cycle through the current user aircraft.
MP_PLAYER_FOLLOW	Set the view to follow the selected user aircraft.
MP_CHAT	Toggles chat window visible/invisible
MP_ACTIVATE_CHAT	Activates chat window
MP_VOICE_CAPTURE_START	Start capturing audio from the users computer and transmitting it to all other players in the multiplayer session who are turned to the same radio frequency.
MP_VOICE_CAPTURE_STOP	Stop capturing radio audio.
MP_BROADCAST_VOICE_CAPTURE_START	Start capturing audio from the users computer and transmitting it to all other players in the multiplayer session.
MP_BROADCAST_VOICE_CAPTURE_STOP	Stop capturing broadcast audio.